DVRtech

Accessories


UTP Video Balun

  • Brightness of video adjustable
  • Real time video transmit
  • Transmits Video 350m to 1800m
  • Built in Surge Protectors Noise Filter
  • No Need to Hassle with Screw Terminals
  • Provides a Highly Cost Effective Solution
  • Huge Savings on Cabling Costs







USB To RS485 Converter





USB to RS485 is an industrial intelligent converter. It is the best solution for the communication between USB and RS485

  • Small volume, easy installation
  • No power supply needed, plug and play
  • Adopt DIP switch setup, random switch RS-485 interface
  • Transmit distance reach up to 1,800m at the rate of 115,200bps
  • Automatic send data control, auto distinguish and sense direction adopt data transfer
  • Auto sense serial signal rate, zero delay automatic transmit
  • Standard: USB1.1, EIA RS-485 standard
  • USB signal: VCC, DATA+, DATA-, GND, FG
  • RS-485 signal: D+, D, GND
  • Working format: asynchronism, point to point or multi-point, 2 lines half duplex
  • Direction: automatic send data control - no software drivers needs
  • Band rate: 300 - 115,200bps, automatic test signal rate
  • Loading: support 32 port loop environment (or handtailor 128 point)
  • Transmission: RS-485 side 1,800m (115,200bps), USB side 5m
  • Protection: 600W surge protection, 15KV static electricity protection
  • Interface type: USB side type A interface female, RS-485 side DB-9 male or 5 terminal blocks
  • Working temperature: -20 to 60 0C
  • Storage temperature: -25 to 85 0C
  • Relative humidity: 5% to 95%
  • Input powered: no external power supply needed
  • Consumption: static consumption less than 80mA, dynamic average consumption less than 150mA
  • Dimensions (L * W * H): 70 * 35 * 18mm
  • Shell: plastic
  • Color: black
  • Weight: 70g




Power Supply Unit

This compact and light weight single output switchmode power supplies,features full temperature, voltage and current overload protection. They have a built-in EMI filter, a power on LED and operate from 85-132VAC/180-264VAC by switch to provide .Input and output connections are via pitch terminal block. It obtains UL1950 TUVEN60950 safety standard and EN55022 CLASSB EN61000-4,2,3,4 EN60555-2, EMC standard.

  • Output Voltage: 12V-48Volt DC (Adjustable)
  • Amps: 3-5, 7-9
  • Ripple and Noise: 240mV
  • Output Current: 10~40.0A
  • Efficiency: 84%
  • Dimensions: 185(L) x 120(W) x 93(H)mm






VGA Extender (150m)



HT1201 VGA video Extender composes a local transmitter and a remote receiver, which are connect by the standard Cat5. The distance of the units can be extended up to 150m.Its ideal comes from any location which needs remote display VGA video signal. Such as: Large screen display ,long-distance image monitoring display ,multimedia information issue system.

  • Quantity of equipment : Transmitter x 1/Receiver x 1
  • Dimensions (L x W x H) : 80mm X 60mm X 22mm
  • Cable: CAT5,CAT5e,CAT6,CAT6e etc.
  • Differential gain: < 0.05%
  • Differential phase: < 0.05
  • SNR(weighting ): 90dB
  • Maximum bandwidth: 350M
  • Input impedance: VGA video 75O,VGA synchronism 4.7KO,
  • Input level : VGA video 0.7Vpp , VGA synchronism TTL
  • Working temperature : -25C ~ +75C
  • Relative humidity: 0~ 95%(Non-condensing)
  • Maximum resolution : 640X48 to 1920X1440
  • Packing Dimension (L*W*H):25cm*20cm*9cm
  • G.W.: 0.9kg






Passive Video Balun (330m/1500m)

Passive video balun (330m/1500m transmission distance)
1 channel passive video balun
(Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
Model No.: 101A, 101B, 101C







1 channel passive video balun

(Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
Model No.: 102A, 102C







1 channel passive power-video-data transceiver

(Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
Model No.: 206, 206-AC, 206A, 206A-AC












4 channel passive video balun

(Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
Model No.: 804M, 804F







8 channel passive video balun/16 channel passive video balun

(Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
Model No.: 808, 1600







Active video balun (1500m/2400m transmission distance)

1 channel active video transceiver
(Active--Passive :1500m transmission distance, Active--Active:2400m transmission distance)
Model No.: 831T, 111T







4 channel active video transceiver / 4 channel active video receiver

(Active--Passive :1500m transmission distance, Active--Active:2400m transmission distance)
Model No.: 411T, 411R







8 channel active video receiver / 16 channel active video receiver

(Active--Passive :1500m transmission distance, Active--Active:2400m transmission distance)
Model No.: 811R, 1611R







16 Channel Passive UTP Video Transceiver

(UTP116P is passive(non-amplified) video balun/transceiver that allows transmission of real-time and high performance color or monochrome (B/W) video over UTP cable. UTP116P can be used as either transmitter or receiver,it receives 16 channel video signals and provides 16 channels output without power supply. In standard 1U structure UTP116P is rack-mountable and excellent for multi-point surveillance.

  • No power required.
  • Transmission distance up to 300m working with passive transceivers (e.g.UTP104P).
  • Transmission distance up to 600m working with active receivers (e.g.UTP101AR,UTP116AR).
  • RJ-45 or green terminal block to be choosed from for UTP cable connection.
  • Compatible with worldwide formats including PAL, NTSC, SECAM.
  • Built-in surge&transient protection.
  • Super interference rejection.
  • Standard 1U structure.







CSA-6301KVM VGA Signal and Keyboard Mouse Extender


The CSA-6301KVM Extender comprises a Host unit (in the local side) and a Remote unit (in the remote side) which are connected by standard UTP cat 5 cable. The host unit receives one channel VGA video and one pair of key board and mouse signals from the console, as well as provides one port local VGA output with local KM and one channel UTP output for transmission. The power supply is through USB, As for the remote side, the unit receives one channel of UTP signal as well as provides one port VGA output and PS2 connector outputs for keyboard and mouse. With the brightness and contrast adjustments designed on, the quality VGA video can be adjusted in different distances and the distance is up to 300m(1000ft).

  • Transmission distance is up to 300m(1000ft).
  • Transmission via UTP cat5/5e
  • Extends VGA video, keyboard and mouse three signals
  • Real-time transmission
  • Quality image available with brightness and contrast adjustments designed on
  • Power supply: through USB in host unit and 12V DC in Remote unit
  • High video resolution - up to 1600 x 1200@80Hz
  • Exceptional reference rejection
  • Built-in transient protection
  • Multiplatform support: supports PC, Mac, Sun, and Linux, systems.
  • Supports VGA, SVGA, XGA, SXGA and Multisync monitors.
  • OS Support: Windows 2000, Windows XP, Linux, Mac and Sun







CSA-6401KVM Passive VGA Signal and Keyboard Mouse Extender


UTP6401KVM is passive KVM extender allowing extension of one channel Keyboard, VGA and Mouse signals over two pieces UTP cable.UTP6401KVM should be used in pair including a transmitter and a receiver. Adjusting knobs on panel are to be used in strongly interferential environment.

  • No Power required(Passive).
  • Transmission distance up to 75m(200ft).
  • High video resolution up to 1024×768 Pixels.
  • Support VGA, SVGA, XGA, SXGA, WXGA ,UXGA and multi-sync monitors.
  • Multi platform:PC,Mac,Sun and Linux systems.
  • Built-in surge&transient protection with grounding rod on front panel.
  • Super interference rejection.